Description
The I2C Level Converter allows you the run 3.3V logic sensors like the Bar30 or Celsius and other accessories off of a 5V logic device like the Arduino Uno!
A selectable solder jumper lets you run 5V or 3.3V power to your sensor, independent of the 3.3V I2C logic. Built in four-pin DF13, JST GH, and 0.1″ header pin connectors provide maximum flexibility and ease of use.
#Contents
- 1 x I2C Level Converter Board
- 2 x Four Pin 0.1″ Straight Header
- 1 x Double Sided Foam Tape